Prevention and Control of Water Pollution

Sewage should be treated before it is discharged into the river or ocean.

This is possible through modern techniques.

Sewage is first passed through a grinding mechanism.

This is then passed through several settling chambers and neutralized with lime.

Up to this stage, the process is called primary treatment.

The sewage still contains a large number of pathogenic and non-pathogenic organisms, and also sufficient quantity of organic matter.

The neutralized effluents are sent to UASB (up-flow anaerobic sludge blanket).

It is a reactor. In this, the anaerobic bacteria degrade the biodegradable material present in the waste water.

This removes foul odor and releases methane, which can be used elsewhere. In this system, the pollution load is reduced upto 85 percent.

After this, water is sent to aeration tanks where it is mixed with air and bacteria.

Bacteria digest the organic waste material.

This is called biological or secondary treatment. Even after the treatment, water is not yet fit for drinking.

The harmful microorganisms need to be killed. The final step (tertiary treatment) is, therefore, a disinfection process, to remove final traces of organics, bacteria, dissolved inorganic solids, etc.

For tertiary treatment, methods, such as chlorination, evaporation,and exchange absorption may be employed.
These depend upon the required
quality of the final treatment.

Apart from the above, you should also adopt the following practices:

(i) Waste food material, paper, decaying vegetables and plastics should not be thrown into open drains.

(ii) Effluents from distilleries, andsolid wastes containing organic matter should be sent to biogas plants for generation of energy.

(iii) Oil slicks should be skimmed off from the surface with suction device. Sawdust may be spread over oil slicks to absorb the oil components.